Hydro-Mech Bridge Plug - Model ETI-HM

DESCRIPTION:

The ‘ETI-HM’ Hydro-Mech Bridge Plug is a hydraulically actuated, mechanically set, drillable,cast iron, high pressure, premium bridge plug.

APPLICATIONS:

Zone isolation for squeeze cementing, fracturing, and plug and abandonment either temporary or permanent.

FEATURES:

Setting mechanism is contained in the bridge plug.

Eliminates complex mechanical setting tool and pulling the work string to retrieve it.

Eliminates the expense of electric line equipment and rental charges.

After the plug is set and tubing released, full tubing ID is available for unobstructed passage of fluids or wireline perforating and logging equipment.

The ‘ETI-HM’ Hydro-Mech Plug may be run and set in tandem with retrievable production packers such as the ‘ETI-R3’ or service tools.

Pressure and temperature rated for 10,000 psi at 300o F above or below.

Top equalizing assures safe drill-out without the plug coming up the hole due to pressures contained below the plug.

Material will packoff and grip in P-110 casing, yet can be quickly drilled out.

NOTE: A centrilizer(s) is recommended when run alone or in any deviated well.

Casing				Bridge Plug
OD (in.)	Weight (lbs./ft.)	Preferred Range of Casing IDs (in.)		Size	Max. OD
OD (in.)	Weight (lbs./ft.)	Min.	Max.	Size	Max. OD
3-1/2	5.75-10.3	2.867	3.258	35	2.750
4	5.6-14	3.340	3.732	41	3.190
4-1/2	9.5-16.6	3.826	4.090	43	3.562
5	11.5-20.8	4.154	4.560	44	3.937
5-1/2	13-23	4.580	5.044	45	4.312
6-5/8	17-32	5.595	6.135	46	5.375
7	17-35	6.000	6.538	47	5.687
7-5/8	20-39	6.625	7.125	48	6.312
8-5/8	24-49	7.310	8.097	49	7.125
9-5/8	29.3-58.4	8.379	9.063	51	8.125
10-3/4	32.7-60.7	9.660	10.192	53	9.437
13-3/8	48-84.5	12.175	12.715	55	11.880

Contact Your Elder Tools International Representative For Complete Availability.

Phone: (361) 275-5600 Fax: (361) 275-6700
Email: oiltools@eldertools.com
Mail: P.O. Box 111 (115 East So. Railroad)
Cuero, Texas 77954, USA